Nova Science Publishers, Inc., Hauppauge, NY, USA: 03

Elsevier (Reference Module in Materials Science & Material Engineering): 31

Elsevier (Encyclopedia of renewable and sustainable materials):00

Springer: 04

Taylor and Francis: 06

Book Chapter

  1. Chapter on ‘Ultrasonic machining of titanium and its alloys’ in book on ‘Titanium alloys preparation, properties and applications, 2010, Nova Science Publishers, Inc., Hauppauge, NY, USA, ISBN 978-1-60876-151-7, pp. 295-318.
  2. Chapter on ‘Sensitization in TIG welding of austenitic stainless steel’ in book on ‘Advances in Materials Science Research, Volume 10’, 2011, Nova Science Publishers, Inc., Hauppauge, NY, USA, ISBN 978-1-62081-310-2 (e-book), pp. 155-182.
  3. Chapter on ‘Investigations for reducing wall thickness in low brass rapid casting using three dimensional printing’ in book on Mechatronics and intelligent manufacturing, Vol.1, 2012, Nova Science publisher, Inc., Hauppauge, NY, USA, ISBN 978-1-61324-947-5, pp. 267-275 (Co-author: J P Singh).
  4. Chapter on ‘Fused deposition modelling-A state of art review and future applications’  in book on ‘Reference Module in Materials Science and Materials Engineering’ doi:10.1016/B978-0-12-803581-8.04037-6, 2016, Oxford: Elsevier; ISBN: 978-0-12-803581-8, pp. 1-20 (Co-author: Harish K.Garg).
  5. Chapter on ‘Implant materials and their processing technologies’  in book on ‘Reference Module in Materials Science and Materials Engineering’ doi:10.1016/B978-0-12-803581-8.04037-6, 2016, Oxford: Elsevier; ISBN: 978-0-12-803581-8, pp. 1-31 (Co-author: Sunpreet Singh, M.S.J. Hashmi).
  6. Chapter on ‘Polymer single-screw extrusion with metal powder reinforcement’ in book on ‘Reference Module in Materials Science and Materials Engineering’ doi:10.1016/B978-0-12-803581-8.04037-6, 2016, Oxford: Elsevier; ISBN: 978-0-12-803581-8, pp. 1-18 (Co-author: N. Singh, P. Bedi, IPS Ahuja).
  7. Chapter on ‘Development of functionally graded material through the fused deposition modelling assisted investment casting process: A case study’ in book on ‘Reference Module in Materials Science and Materials Engineering’, 2016, Oxford: Elsevier; ISBN: 978-0-12-803581-8, pp. 1-18 (Co-author: Sunpreet Singh).
  8. Chapter on ‘Investment casting’ in book on ‘Reference Module in Materials Science and Materials Engineering’, 2016, Oxford: Elsevier; ISBN: 978-0-12-803581-8, pp. 1-18 (Co-author: Sunpreet Singh, M.S.J. Hashmi).
  9. Chapter on ‘Surgical support and modeling tools, materials, and their processing technologies’ in book on ‘Reference Module in Materials Science and Materials Engineering’, 2017, Oxford: Elsevier; Vol. 13, pp. 1-9 (Co-author: Sunpreet Singh, M.S.J. Hashmi).
  10. Chapter on ‘Effect of cryogenic treatment on ultrasonic machining of titanium and its alloys: A review’ in book on ‘Reference Module in Materials Science and Materials Engineering’, 2017, Oxford: Elsevier; Vol. 13, pp. 1-10 (Co-author: G. Dhuria, A. Batish).
  11. Chapter on ‘Friction welding of dissimilar plastic-based material by metal powder reinforcement’ in book on ‘Reference Module in Materials Science and Materials Engineering’, 2017, Oxford: Elsevier; Vol. 13, pp. 1-16 (Co-author: R. Kumar, M.S.J. Hashmi).
  12. Chapter on ‘Vacuum molding’ in book on ‘Reference Module in Materials Science and Materials Engineering’, 2017, Oxford: Elsevier; Vol. 13, pp. 1-18 (Co-author: Sunpreet Singh, M.S.J. Hashmi).
  13. Chapter on ‘Polymer waste as fused deposition modeling feed stock filament for industrial applications’, in book on ‘Reference Module in Materials Science and Materials Engineering’, 2017, Oxford: Elsevier; pp. 1-12, ISBN: 978-0-12-803581-8 (Co-author: Ranvijay Kumar, Sudhir Kumar).
  14. Chapter on ‘Effect of cryogenic treatment on electric discharge machining of titanium and its alloys’, in book on ‘Reference Module in Materials Science and Materials Engineering’, 2017, Oxford: Elsevier; pp. 1-17, ISBN: 978-0-12-803581-8 (Co-author: Sanjeev Kumar, Ajay Batish).
  15. Chapter on ‘Additive manufacturing: An overview’, in book on ‘Reference Module in Materials Science and Materials Engineering’, 2017, Oxford: Elsevier; pp. 1-12, ISBN: 978-0-12-803581-8 (Co-author: Sunpreet Singh).
  16. Chapter on ‘Three dimensional printing’, in book on ‘Reference Module in Materials Science and Materials Engineering’, 2017, Oxford: Elsevier; pp. 1-21, ISBN: 978-0-12-803581-8 (Co-author: Munish Chhabra).
  17. Chapter on ‘Recent advances in additive bio-manufacturing’, in book on ‘Reference Module in Materials Science and Materials Engineering’, 2017, Oxford: Elsevier; pp. 1-8, ISBN: 978-0-12-803581-8 (Co-author: Sunpreet Singh).
  18. Chapter on ‘Friction stir welding of dissimilar plastic based material with metal powder reinforcement’, in book on ‘Reference Module in Materials Science and Materials Engineering’, 2017, Oxford: Elsevier; pp. 1-14, ISBN: 978-0-12-803581-8 (Co-author: V. Kumar, M.S.J.Hashmi).
  19. Chapter on ‘Advances in fused deposition modeling’, in book on ‘Reference Module in Materials Science and Materials Engineering’, 2017, Oxford: Elsevier; pp. 1-10, ISBN: 978-0-12-803581-8 (Co-author: K.S.Boparai).
  20. Chapter on ‘ Development of metal matrix composite based dental implants by stir casting in silicon molding based investment shells’, in book on ‘Reference Module in Materials Science and Materials Engineering’, 2017, Oxford: Elsevier; pp. 1-9, ISBN: 978-0-12-803581-8 (Co-author: Ranvir Singh, J.S.Dureja).
  21. Chapter on ‘Integration of fused deposition modelling and vapour smoothing for bio medical applications’, in book on ‘Reference Module in Materials Science and Materials Engineering’, 2017, Oxford: Elsevier; pp. 1-15. ISBN: 978-0-12-803581-8 (Co-author: Sunpreet Singh).
  22. Chapter on ‘Polymer Twin Screw Extrusion With Filler Powder Reinforcement’, in book on ‘Reference Module in Materials Science and Materials Engineering’, 2017, Oxford: Elsevier; pp. 1-15. ISBN: 978-0-12-803581-8 (Co-author: Sunpreet Singh, M.S.J.Hashmi).
  23. Chapter on ‘Use of Fused Deposition Modelling Assisted Investment Casting for Developing Functionally Graded Material’, in book on ‘Manufacturing Techniques for Materials Engineering and Engineered’, 2017, CRC Press, Taylor & Francis Group, 6000 Broken Sound Parkway NW, Suite 300, Boca Raton, FL 33487-2742; pp 559-587.  ISBN: 978-1-138-09926-5.
  24. Chapter on ‘Development of Low-Cost Graphene-Polymer Blended In-House Filament for Fused Deposition Modeling’, in book on ‘Reference Module in Materials Science and Materials Engineering’, 2017, Oxford: Elsevier; pp. 1-10. ISBN: 978-0-12-803581-8 (Co-author: Ranvijay Kumar).
  25. Chapter on ‘Investment Casting (Disposable Mold)’, in book on ‘Reference Module in Materials Science and Materials Engineering’, 2017, Oxford: Elsevier; pp. 1-12. ISBN: 978-0-12-803581-8 (Co-author: Sunpreet Singh).
  26. Chapter on ‘Thermal Analysis for Joining of Dissimilar Polymeric Materials Through Friction Stir Welding’, in book on ‘Reference Module in Materials Science and Materials Engineering’, 2017, Oxford: Elsevier; pp. 1-13. ISBN: 978-0-12-803581-8 (Co-author: Ranvijay Kumar, IPS Ahuja).
  27. Chapter on ‘Four-Dimensional Printing for Clinical Dentistry’, in book on ‘Reference Module in Materials Science and Materials Engineering’, 2017, Oxford: Elsevier; pp. 1-28, ISBN: 978-0-12-803581-8 (Co-author: Ravinder Sharma, Nishant Ranjan).
  28. Chapter on ‘Conducting Polymer Solution and Gel Processing’, in book on ‘Reference Module in Materials Science and Materials Engineering’, 2017, Oxford: Elsevier; pp. 1-11, ISBN: 978-0-12-803581-8 (Co-author: Narinder Singh).
  29. Chapter on ‘Prospect of Graphene for Use as Sensors in Miniaturized and Biomedical Sensing Devices’, in book on ‘Reference Module in Materials Science and Materials Engineering’, 2018, Oxford: Elsevier; pp. 1-13, ISBN: 978-0-12-803581-8 (Co-author: Ranvijay Kumar).
  30. Chapter on ‘Investigations for Metal Matrix Composite Prepared by Using Waste Polymer-Based Sacrificial Rapid Pattern in Investment Casting’, in book on ‘Reference Module in Materials Science and Materials Engineering’, 2018, Oxford: Elsevier; pp. 1-9, ISBN: 978-0-12-803581-8 (Co-author: Narinder Singh, IPS Ahuja).
  31. Chapter on ‘Development of In-House Nano-Hydroxyapatite Particles for Dental Applications’, in book on ‘Nanobiomaterials’, 2018, CRC Press: Taylor and Francis group; Chapter No. 14, pp.263-276, ISBN: 13: 978-0-8153-9978-0 (Co-author: Sunpreet Singh).
  32.  Chapter on ‘Experimental Investigations for Development of Hybrid Feed Stock Filament of Fused Deposition Modeling’, in book on ‘Reference Module in Materials Science and Materials Engineering’, 2018, Oxford: Elsevier; pp. 1-26, ISBN: 978-0-12-803581-8 (Co-author: Fernando Fraternali, Ilenia Farina, M.S.J Hashmi).
  33. Chapter on ‘Investigations for Development of Feed Stock Filament of Fused Deposition Modeling From Recycled Polyamide’, in book on ‘Reference Module in Materials Science and Materials Engineering’, 2018, Oxford: Elsevier; pp. 1-20, ISBN: 978-0-12-803581-8 (Co-author: Fernando Fraternali, Giulio Bonazzi, M.S.J. Hashmi, Ranvijay Kumar, Nishant Ranjan).
  34. Chapter on ‘Application of Graphene Polymer Blended Feed Stock Filament for 3D/4D Printing’, in book on ‘Reference Module in Materials Science and Materials Engineering’, 2018, Oxford: Elsevier; pp. 1-10, ISBN: 978-0-12-803581-8 (Co-author: Narinder Singh, Gurleen S Sandhu).
  35. Chapter on ‘Investigations for Rapid Tooling Prepared With Waste Polymer-Based Hybrid Filament’, in book on ‘Reference Module in Materials Science and Materials Engineering’, 2018, Oxford: Elsevier; pp. 1-18, ISBN: 978-0-12-803581-8 (Co-author: Piyush Bedi, IPS Ahuja).
  36. Chapter on ‘Continuous Casting’, in book on ‘Reference Module in Materials Science and Materials Engineering’, 2018, Oxford: Elsevier; pp. 1-11, ISBN: 978-0-12-803581-8 (Co-author: Sunpreet Singh).
  37. Chapter on ‘Developing functionally graded materials by fused deposition modelling assisted investment casting’, in book on ‘Additive Manufacturing: Applications and Innovations’ Part of the Manufacturing Design and Technology Series (Series Editor: J. Paulo Davim), CRC Press, Taylor & Francis, 2018; pp. 1-36, (Co-author: Sunpreet Singh).
  38. Chapter on ‘Fused deposition modelling: applications and advancements’, in book on ‘Additive Manufacturing: Applications and Innovations’ Part of the Manufacturing Design and Technology Series (Series Editor: J. Paulo Davim), CRC Press, Taylor & Francis, 2018; pp. 127-186, (Co-author: Kamaljit Singh Bopari and Jasgurpreet Singh Chohan).
  39. Chapter on ‘Metal matrix composite from waste thermoplastics’, in book on ‘Additive Manufacturing: Applications and Innovations’ Part of the Manufacturing Design and Technology Series (Series Editor: J. Paulo Davim), CRC Press, Taylor & Francis, 2018; pp. 187-210, (Co-author: Narinder Singh and IPS Ahuja).
  40. Chapter on ‘Joining of dissimilar thermoplastic with friction stir welding through rapid tooling’, in book on ‘Additive Manufacturing: Applications and Innovatio0ns’ Part of the Manufacturing Design and Technology Series (Series Editor: J. Paulo Davim), CRC Press, Taylor & Francis, 2018; pp. 211-240, (Co-author: Ranvijay Kumar and IPS Ahuja).
  41. Chapter on ‘Effect of process parameters of fused deposition modeling and vapour smoothing on surface properties of ABS replicas for biomedical applications’, in book on, Additive Manufacturing of Emerging Materials, Chapter 7, Springer Nature, 2019, doi.org/10.1007/978-3-319-91713-9_7; In-Press, (Co-author: Jasgurpreet Singh Chohan and Kamaljit S Boparai).
  42. Chapter on ‘Development of rapid tooling using fused deposition modeling’, in book on, Additive Manufacturing of Emerging Materials, Chapter 8, Springer Nature, 2019, doi.org/10.1007/978-3-319-91713-9_8; In-Press, (Co-author: Kamaljit S Boparai).
  43. Chapter on ‘Development of ABS-Graphene Blended Feed Stock Filament for FDM Applications, in book on, Additive Manufacturing of Emerging Materials, Chapter 9, Springer Nature, 2019, doi.org/10.1007/978-3-319-91713-9_9; In-Press, (Co-author: Gurleen S Sandhu).
  44. Chapter on ‘Fabrication of PLA-HAp-CS based biocompatible and biodegradable feedstock filament using twin screw extrusion, in book on, Additive Manufacturing of Emerging Materials, Chapter 11, Springer Nature, 2019, doi.org/10.1007/978-3-319-91713-9_11; In-Press, (Co-author: Nishant Ranjan, IPS Ahuja and Jatenderpal Singh).
Monograph/Book published:
  1. Book on ‘Investigations for machining characteristics of titanium alloys by USM’, 2010, Lambert Academic Publishing AG & Co. KG, Saarbrücken, Germany, ISBN-NR.: 978-3-8383-9894-5.
  2. Book on ‘Application of cryogenic treatment for machining cost reduction: A case study’, 2010, Lambert Academic Publishing AG & Co. KG, Saarbrücken, Germany, ISBN-NR.: 978-3-8433-7108-7, (Co-author: Kamaljit Singh).
  3. Book on ‘Process capability of rapid manufacturing for plastic components’, 2010, Lambert Academic Publishing AG & Co. KG, Saarbrücken, Germany, ISBN-NR.: 978-3-8433-8735-4, (Co-author: Balpreet Singh Thind).
  4. Book on ‘Pattern development for hand tool die with fused deposition modeling’, 2011, Lambert Academic Publishing AG & Co. KG, Saarbrücken, Germany, ISBN-NR: 978-3-8433-8735-4, (Co-author: Harish Kumar Garg).
  5. Book on ‘Some investigations for investment casting applications’, 2012, Lambert Academic Publishing AG & Co. KG, Saarbrücken, Germany, ISBN-NR: 978- 3-8484-8861-2, (Co-author: Sunpreet Singh).
  6. Book on ‘Effect of pressure on casting properties in cold chamber die casting’, 2012, Lambert Academic Publishing AG & Co. KG, Saarbrücken, Germany, ISBN-NR: 978-3-659-12721-2, (Co-author: Rahul Kapoor).
  7. Book on ‘Effect of some parameters on properties of hot chamber die casting’, 2012, Lambert Academic Publishing AG & Co. KG, Saarbrücken, Germany, ISBN-NR: 978-3-659-13087-8, (Co-author: Harvir Singh).
  8. Book on ‘Effect of shape factor, slurry layers and temperature in IC’, 2012, Lambert Academic Publishing AG & Co. KG, Saarbrücken, Germany, ISBN-NR: 978-3-659-13560-6, (Co-author: Jagdeep Singh).
  9. Book on ‘Plastic component replicas by silicon moulding process’, 2012, Lambert Academic Publishing AG & Co. KG, Saarbrücken, Germany, ISBN-NR: 978-3-659-14138-6, (Co-author: Vipul Sharma).
  10. Book on ‘Maintenance of blast furnace section: A case study of Steel plant’, 2012, Lambert Academic Publishing AG & Co. KG, Saarbrücken, Germany, ISBN-NR: 978-3-659-27047-5, (Co-author: Navneet Saini).
  11. Book on ‘Maintenance planning and control of boiler section of thermal plant: A case study’, 2012, Lambert Academic Publishing AG & Co. KG, Saarbrücken, Germany, ISBN-NR: 978-3-8465-3661-2, (Co-author: Sumeet Sohal).
  12. Book on ‘ABS replicas in investment casting applications’, 2013, Lambert Academic Publishing AG & Co. KG, Saarbrücken, Germany, ISBN 978-3-659-42853-1, (Co-author: Munish Kumar Gupta).
  13. Book on ‘Replication of FDM based patterns via vacuum moulding’, 2013, Lambert Academic Publishing AG & Co. KG, Saarbrücken, Germany, ISBN 978-3-659-42852-4, (Co-author: Gurinder Singh).
  14. Book on ‘Experimental investigations for development of MMC’, 2013, Lambert Academic Publishing AG & Co. KG, Saarbrücken, Germany, ISBN 978-3-659-31335-6, (Co-author: Ranvir Singh).
  15. Book on ‘Tribological behaviour of dual and triple particle size Al2O3’, 2013, Lambert Academic Publishing AG & Co. KG, Saarbrücken, Germany, ISBN 978-3-659-27305-6, (Co-author: Kanwalpreet Sahni).
  16. Book on ‘Comparison of investment casting prepared for bio-medical application’, 2013, Lambert Academic Publishing AG & Co. KG, Saarbrücken, Germany, ISBN 978-3-659-43338-2, (Co-author: Gurpartap Singh).
  17. Book on ‘Investigations for casting of Al-SiC metal matrix composite’, 2013, Lambert Academic Publishing AG & Co. KG, Saarbrücken, Germany, ISBN 978-3-659-43702-1, (Co-author: Jaswinder Singh).
  18. Book on ‘Additive Manufacturing: Applications and Innovations’ Part of the Manufacturing Design and Technology Series (Series Editor: J. Paulo Davim), CRC Press, Taylor & Francis, 2018

Books/ Journal Editor

  1. Editor in chief for ‘International Journal of Advanced Mechatronics and Robotics’, Serial publications, New Delhi.
  2. Editor in chief for ‘International Journal of Materials Science and Engineering’, Serial publications, New Delhi.
  3. Editor for special topic volume ‘Rapid casting solutions’ for periodical ‘Material Science Forum’ as print, CD and online at www.scientific.net by Trans Tech Publications Ltd., Switzerland, 2011.
  4. Editor for Special Issue on: ‘Advances in Rapid Manufacturing of Processes and Materials’ for International Journal of Materials Engineering Innovation (IJMatEI), Inderscience publications, U.K, Volume 3, Nos. ¾, 2012.
  5. Editor for special topic volume ‘Recent advancement in manufacturing processes’ for periodical ‘Material Science Forum’ as print, CD and online at www.scientific.net by Trans Tech Publications Ltd., Switzerland, Vol. 751, 2013.
  6. Member Editorial Board Int. Journal of Materials Forming and Machining Processes [IJMFMP] igi-global.com/ijmfmp.
  7. Member Editorial Board Journal of Punjab Academy of Sciences, Punjabi University Patiala (ISSN-2229-7014).
  8. Editor for special topic volume ‘Recent advancement in manufacturing processes’ Vol.II for periodical ‘Material Science Forum’ as print, CD and online at www.scientific.net by Trans Tech Publications Ltd., Switzerland, Vol. 808, 2015.
  9. Editor for Special Issue on: ‘Advancements in Additive Manufacturing’ for International Journal of Materials Engineering Innovation (IJMatEI), Inderscience publications, U.K, 2015.
  10. Editor for special topic volume ‘Material processing technologies’ for periodical ‘Material Science Forum’ as print, CD and online at www.scientific.net by Trans Tech Publications Ltd., Switzerland, 2016.
  11. Editor for book on ‘Additive Manufacturing: Applications and Innovations’ Part of the Manufacturing Design and Technology Series (Series Editor: J. Paulo Davim), CRC Press, Taylor & Francis, 2018.