Mr. Ranvijay Kumar
Qualification: PhD student
Designation: SRF in BRNS Project

Education:
Mr. Ranvijay Kumar received his bachelor degree in Mechanical Engineering from Sant Longowal Institute of Engineering and Technology, Longowal with specialization in manufacturing engineering in 2014.
In area of solid state welding, he received his masters degree (Production Engineering) under supervision of Dr. Rupinder Singh May 2016 from Guru Nanak Dev Engineering College, Ludhiana.
Currently he is pursuing his PhD under guidance of Dr. Rupinder Singh and Dr. Inderpreet Singh Ahuja from Punjabi University, Patiala
 

Reasearh:

List of publication in peer-reviewed journals

  1. Singh, Rupinder, Ranvijay Kumar, Luciano Feo, and Fernando Fraternali. “Friction welding of dissimilar plastic/polymer materials with metal powder reinforcement for engineering applications.” Composites Part B: Engineering 101 (2016): 77-86. (SCI/Impact factor-6.864)
  2. Kumar, Ranvijay, Rupinder Singh, and I. P. S. Ahuja. “Investigations of mechanical, thermal and morphological properties of FDM fabricated parts for friction welding applications.” Measurement 120 (2018): 11-20. (SCI/Impact factor-2.791)
  3. Kumar, Ranvijay, Rupinder Singh, and I. P. S. Ahuja. “Melt processing for enhancing compatibility of aluminum-reinforced acrylonitrile–butadiene–styrene and polyamide 6 for friction welding applications.” Journal of the Brazilian Society of Mechanical Sciences and Engineering 40, no. 8 (2018): 378. (SCI/Impact factor-1.743)
  4. Singh, Rupinder, Ranvijay Kumar, and Nishant Ranjan. “Sustainability of recycled ABS and PA6 by banana fiber reinforcement: thermal, mechanical and morphological properties.” Journal of The Institution of Engineers (India): Series C 100, no. 2 (2019): 351-360. (Scopus)
  5. Singh, Rupinder, Ranvijay Kumar, and I. P. S. Ahuja. “Mechanical, thermal and melt flow of aluminum-reinforced PA6/ABS blend feedstock filament for fused deposition modeling.” Rapid Prototyping Journal 24, no. 9 (2018): 1455-1468. (SCI/Impact factor-2.801)
  6. Kumar, Ranvijay, Rupinder Singh, I. P. S. Ahuja, Ada Amendola, and Rosa Penna. “Friction welding for the manufacturing of PA6 and ABS structures reinforced with Fe particles.” Composites Part B: Engineering 132 (2018): 244-257. (SCI/Impact factor-6.864)
  7. Singh, Rupinder, Ranvijay Kumar, Nishant Ranjan, Rosa Penna, and Fernando Fraternali. “On the recyclability of polyamide for sustainable composite structures in civil engineering.” Composite Structures 184 (2018): 704-713. (SCI/Impact factor- 4.829)
  8. Kumar, Ranvijay, Rupinder Singh, David Hui, Luciano Feo, and Fernando Fraternali. “Graphene as biomedical sensing element: State of art review and potential engineering applications.” Composites Part B: Engineering 134 (2018): 193-206. . (SCI/Impact factor-6.864)
  9. Kumar, Ranvijay, Rupinder Singh, I. P. S. Ahuja, Rosa Penna, and Luciano Feo. “Weldability of thermoplastic materials for friction stir welding-A state of art review and future applications.” Composites Part B: Engineering 137 (2018): 1-15. (SCI/Impact factor-6.864)
  10. Singh, Rupinder, Ranvijay Kumar, Ida Mascolo, and Mariano Modano. “On the applicability of composite PA6-TiO2 filaments for the rapid prototyping of innovative materials and structures.” Composites Part B: Engineering 143 (2018): 132-140. (SCI/Impact factor-6.864)
  11. Kumar, Ranvijay, Rupinder Singh, and I. P. S. Ahuja. “Friction stir welding of ABS-15Al sheets by introducing compatible semi-consumable shoulder-less pin of PA6-50Al.” Measurement 131 (2019): 461-472. (SCI/Impact factor-2.791)
  12. Kumar, Ranvijay, Rupinder Singh, and Ilenia Farina. “On the 3D printing of recycled ABS, PLA and HIPS thermoplastics for structural applications.” PSU Research Review 2, no. 2 (2018): 115-137.
  13. Singh, Rupinder, Ranvijay Kumar, Ilenia Farina, Francesco Colangelo, Luciano Feo, and Fernando Fraternali. “Multi-material additive manufacturing of sustainable innovative materials and structures.” Polymers 11, no. 1 (2019): 62. (SCI/Impact factor-3.164)
  14. Kumar, Ranvijay, Rupinder Singh, and I. P. S. Ahuja. “Mechanical, thermal and micrographic investigations of friction stir welded: 3D printed melt flow compatible dissimilar thermoplastics.” Journal of Manufacturing Processes 38 (2019): 387-395. (SCI/Impact factor-3.462)
  15. Singh, Rupinder, Inderpreet Singh, Ranvijay Kumar, and G. S. Brar. “Waste thermosetting polymer and ceramic as reinforcement in thermoplastic matrix for sustainability: Thermomechanical investigations.” Journal of Thermoplastic Composite Materials (2019): 0892705719847237. (SCI/Impact factor-1.343)
  16. Kumar, Ranvijay, Rupinder Singh, and I. P. S. Ahuja. “Friction stir welding of 3D printed melt flow compatible dissimilar thermoplastic composites.” Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science (2019): 0954406219848465. (SCI/Impact factor-1.359)
  17. Singh, Jaskaran, Rupinder Singh, Ranvijay Kumar, Md Mustafizur Rahman, and Seeram Ramakrishna. “PLA-PEKK-HAp-CS composite scaffold joining with friction stir spot welding.” Journal of Thermoplastic Composite Materials(2019): 0892705719850609. . (SCI/Impact factor-1.343)
  18. Singh, Narinder, Rupinder Singh, Ranvijay Kumar, and I. P. S. Ahuja. “Recycled HDPE reinforced Al2O3 and SiC three dimensional printed patterns for sandwich composite material.” Engineering Research Express 1, no. 1 (2019): 015007.
  19. Singh, Rupinder, Ranvijay Kumar, and Inderpreet Singh. “Investigations on 3D printed thermosetting and ceramic-reinforced recycled thermoplastic-based functional prototypes.” Journal of Thermoplastic Composite Materials (2019): 0892705719864623. (SCI/Impact factor-1.343)
  20. Singh, Rupinder, Inderpreet Singh, and Ranvijay Kumar. “Mechanical and morphological investigations of 3D printed recycled ABS reinforced with bakelite–SiC–Al2O3.” Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science233, no. 17 (2019): 5933-5944. (SCI/Impact factor-1.359)
  21. Singh, Rupinder, Ranvijay Kumar, Shubham Tiwari, Shubham Vishwakarma, Shivam Kakkar, Vishal Rajora, and Sahil Bhatoa. “On secondary recycling of ZrO2-reinforced HDPE filament prepared from domestic waste for possible 3-D printing of bearings.” Journal of Thermoplastic Composite Materials (2019): 0892705719864628. (SCI/Impact factor-1.343)
  22. Singh, Rupinder, Gurchetan Singh, Jaskaran Singh, and Ranvijay Kumar. “Investigations for tensile, compressive and morphological properties of 3D printed functional prototypes of PLA-PEKK-HAp-CS.” Journal of Thermoplastic Composite Materials (2019): 0892705719870595. (SCI/Impact factor-1.343)
  23. Singh, Rupinder, Gurchetan Singh, Jaskaran Singh, Ranvijay Kumar, Md Mustafizur Rahman, and Seeram Ramakrishna. “Thermomechanical investigations of PEKK-HAp-CS composites.” Proceedings of the Institution of Mechanical Engineers, Part H: Journal of Engineering in Medicine 233, no. 11 (2019): 1196-1203. (SCI/Impact factor-1.317)
  24. Singh, Rupinder, Ranvijay Kumar, Pawanpreet, Mohit Singh, and Jatenderpal Singh. “On mechanical, thermal and morphological investigations of almond skin powder-reinforced polylactic acid feedstock filament.” Journal of Thermoplastic Composite Materials (2019): 0892705719886010. (SCI/Impact factor-1.343)
  25. Singh, Jaskaran, Rupinder Singh, Ranvijay Kumar, Md Mustafizur Rahman, and Seeram Ramakrishna. “PLA-PEKK-HAp-CS composite scaffold joining with friction stir spot welding.” Journal of Thermoplastic Composite Materials (2019): 0892705719850609. (SCI/Impact factor-1.343)
  26. Singh, Rupinder, Gurchetan Singh, Jaskaran Singh, and Ranvijay Kumar. “On printability of PLA-PEKK-HAp-CS based functional prototypes with FDM: thermo-mechanical investigations.” Materials Research Express 6, no. 11 (2019): 115338. (SCI/Impact factor-1.449)
  27. Ranjan, Nishant, Rupinder Singh, I. P. S. Ahuja, Ranvijay Kumar, Jatenderpal Singh, Anita K. Verma, and Ankita Leekha. “On 3D printed scaffolds for orthopedic tissue engineering applications.” SN Applied Sciences 2, no. 2 (2020): 1-8. (Emerging SCI)
  28. Singh, Rupinder, Ranvijay Kumar, Mohit Singh, and Pawan Preet. “On compressive and morphological features of 3D printed almond skin powder reinforced PLA matrix.” Materials Research Express (2019). (SCI/Impact factor-1.449)
  29. Singh, Rupinder, I. P. S. Ahuja, and Sandeep Grover. “Process Capability Analysis for Frictionally Welded Dissimilar Polymeric Materials.” Materials Today: Proceedings 5, no. 9 (2018): 18502-18509. (Scopus: Impact factor- 0.694)
  30. Singh, R., R. Kumar, I. Farina, M. De Piano, A. Amendola, and F. Fraternali. “Mechanical and Experimental Study on the use of Sustainable Materials for Additive Manufacturing.” In IOP Conference Series: Materials Science and Engineering, vol. 473, no. 1, p. 012010. IOP Publishing, 2019. (Scopus)
  31. Kumar, Ranvijay, Rupinder Singh, and Inderpreet Singh Ahuja. “Friction Stir Welding of Three-Dimensional Printed Polymer Composites with Semi-consumable Tool.” In Advances in Additive Manufacturing and Joining, pp. 17-29. Springer, Singapore, 2020.
  32. Kumar, Ranvijay, Rupinder Singh, I. P. S. Ahuja, and K. N. Karn. “Processing of Melt Flow Compatible Thermoplastic Composites for Solid State Welding Applications.” Materials Today: Proceedings 18 (2019): 3167-3173. (Scopus: Impact factor- 0.694)
  33. Kumar, Ranvijay, Rupinder Singh, and I. P. S. Ahuja. “Investigating the Polymeric Composites for Online Repair and Maintenance.” In Futuristic Composites, pp. 165-179. Springer, Singapore, 2018.
  34. Kumar, Ranvijay, Rupinder Singh, and I. P. S. Ahuja. “Joining of dissimilar thermoplastic with friction stir welding through rapid tooling.” Additive Manufacturing: Applications and Innovations (2018).
  35. Singh, Rupinder, Ranvijay Kumar, Ada Amendola, Ilenia Farina, Narinder Singh, and Fernando Fraternali. “Graphene Reinforced Composites as Sensing Elements.” In Key Engineering Materials, vol. 826, pp. 33-44. Trans Tech Publications Ltd, 2019. (Scopus)

 

Ranvijay Biosketch

Mr. Ranvijay Kumar Qualification: PhD student Designation: SRF in BRNS Project Education: Mr. Ranvijay Kumar received his bachelor degree in Mechanical Engineering from Sant Longowal Institute of Engineering and Technology, Longowal with specialization in manufacturing engineering in 2014. In area of solid state welding, he received his masters degree (Production Engineering) under supervision of Dr. […]